Zoom GFX-5 Spécifications télécharger pdf (Page 6)

ZOOM GFX-5

Playing Patches (Play Mode)

The condition where you call up patches stored in the memory of the GFX-5 and use them for playing your

instrument is called play mode. When you turn the GFX-5 on, it is initially always in this mode. The various

operations possible in play mode are described in this section.

Panel display in play mode

In play mode, the panel shows the following

information.

AMPDRV

Patch name

Keys for effect modules that are ON in the currently selected patch are lit.

Group (A/b/U/u)

Bank number (0 - 9)

When a dot (.) is shown here, patches can

be selected from a user group or preset

group.

When a dot (.) is shown here, an effect

parameter has been changed.

Selecting a patch

To select a patch in play mode, press one

of the foot switches [1] - [3] whose LED

is not lit.

The LED of the foot switch for the patch that is

currently selected is lit.

OTE

If you press the foot switch whose LED is lit, the

unit goes into bypass/mute mode (

→

p. 11).

To select a patch in another group or bank,

use the BANK [

]/[

] foot switches and

then the foot switches [1] - [3] to select the

group and bank.

For example, if you repeatedly press the BANK

] foot switch, the group/bank is switched as

follows.

To directly switch groups, use the

PARAMETER [

]/[

] keys.

Pressing the PARAMETER [Q

] key moves to the

next higher group and pressing the PARAMETER

] key moves to the next lower group.

If you want to select only patches from a

user group or preset group, press both

PARAMETER[

] /[

] keys together.

Each time you press both PARAMETER [Q

]/[W]

keys together, the group type changes.

U0 U9

A0 A1 A9 B0 B9

User groups

Preset groups

U0 A0 B0

Preset groups

only

Both group

User groups

only

Dot is lit

Playing Patches (Play Mode)

ZOOM GFX-5

Using the internal tuner

(bypass/mute function)

The GFX-5 has a built-in auto-chromatic tuner for

guitars. To use the tuner function, the built-in

effects must be bypassed (temporarily turned off) or

the unit must be muted (original sound and effect

sound turned off).

To set the GFX-5 to the bypass (mute)

condition, press the foot switch of the

currently selected patch (the switch

whose LED is lit) in play mode.

Pressing and immediately releasing the foot switch

sets the GFX-5 to the bypass condition. The

expression pedal is automatically switched to

function as a volume pedal.

Pressing and holding the foot switch for more than

one second sets the GFX-5 to the mute condition.

Play the open string you want to tune.

The [GROUP/BANK] indicator shows the note

which is closest to the current pitch. Adjust the

pitch so that the indicator shows the desired note.

To change the reference pitch of the

tuner, use the [VALUE] dial.

The current reference pitch is brieﬂy shown on the

display. The default setting after power-on is center

A = 440 Hz.

While the reference pitch is shown, you can change

the pitch by turning the [VALUE] dial.

The setting range is 435 - 445 Hz in 1-Hz steps.

When the GFX-5 is turned off and on again, it will

be reset to 440 Hz.

To return to the play mode, press one of

the foot switches [1] - [3].

The patch of that foot switch becomes active again.

NOTE

If you switch the bank/group while using the

tuner, the tuner function will be temporarily

disabled. When you return to the original bank/

group, the tuner function becomes active again.

BYPASS

Release immediately

Bypass

MUTE

Press and release after more than 1 second

Mute

The note is shown on the left part of the indicator.

The more the pitch is off, the faster the rotation

of the indicator.

Pitch is sharp Correct pitch Pitch is flat

Reference pitch value

440HZ

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Commentaires sur ces manuels

Pas de commentaire

Zoom GFX-5 Spécifications Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Pédale de musique Zoom GFX-5