Zoom GFX-5 Spécifications télécharger pdf (Page 14)

Other Functions

ZOOM GFX-5

To stop sampling, press the foot switch

[2].

Sampling stops and playback immediately starts

from the beginning. If you do not stop sampling

manually, it will end automatically when the

maximum sampling time is up (6 seconds), and

playback will begin.

Use the PARAMETER [

]/[

] keys to

bring up the indication “SPMODE” on the

display.

SPMODE is a parameter that determines how the

recorded sample is played back. Turn the [VALUE]

dial to select one of the following settings.

●

Normal speed playback

●

Half tempo, half pitch playback

●

Half tempo, normal pitch playback

●

Quarter tempo, quarter pitch playback

●

Quarter tempo, normal pitch playback

Use the foot switches [1]/[2] to control

sample playback (start/stop/rewind).

When using the sampler function for the ﬁrst time,

the recorded sample is played back only once (one-

shot playback). During playback, the LED of foot

switch [2] lights up. The current playback position

is indicated by the lit/out status of the effect module

keys.

To repeatedly play the sample, use the

PARAMETER [

]/[

] keys to bring up

the indication “SPPLAY” on the display,

and turn the [VALUE] dial to select “rP”.

The recorded sample is now played back repeatedly.

By changing the setting to “1S”, you can return to

one-shot playback.

To adjust the playback volume, use the

PARAMETER [

]/[

] keys to bring up

the indication “SP LVL” on the display,

and turn the [VALUE] dial.

The playback volume can be changed over the

range of 0 - 30. Choose a value that gives the best

results in your system.

HINT

While the sampler function is active, you can also

use the expression pedal to adjust the playback

level.

10.

To return to play mode, press the

[SAMPLER] key while playback is

stopped.

NOTE

• When you return to play mode, the recorded

contents are lost.

• The sampler function cannot be used together

with the rhythm function.

Calibrating the

expression pedal

The expression pedal is adjusted for optimum

operation at the factory, but sometimes,

readjustment may be necessary. If pushing the pedal

fully down does not have a strong effect, or if the

volume or sound changes excessively even when

the pedal is only lightly pushed, calibrate the pedal

as follows.

SPMODE

Sample play mode

Playback volume

SP LVL

Other Functions

ZOOM GFX-5

Turn power to the GFX-5 on while keeping

the [ASSIGN] key depressed.

The indication “MIN” is shown on the display.

With the expression pedal fully raised,

press the [STORE] key.

The display indication changes to “MAX”.

Push the expression pedal fully down and

then lift your foot off the pedal.

Press the [STORE] key.

The adjustment is complete, and the unit returns to

the play mode.

HINT

• The position of the pedal in step 3

determines the module on/off switching

point. If you want the pedal to perform on/off

switching with a lighter touch, set the pedal in

step 3 to a somewhat higher position.

• If the display shows “ERROR”, repeat the

procedure from step 2.

Resetting the GFX-5 to

the factory default

condition

The patches in the user groups can be returned to

their original condition at any time, even if you

have changed them.

Turn power to the GFX-5 on while keeping

the [STORE] key depressed.

The indication “ALINIT” is shown on the display.

Press the [STORE] key once more.

All patches are reset to the factory default

condition, and the unit automatically switches to

play mode.

By pressing the [EDIT/EXIT] key before carrying

out step 2, you can cancel the operation and go

directly to play mode.

Push strongly, so that

pedal touches here.

When foot is lifted,

pedal returns slightly.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire

Zoom GFX-5 Spécifications Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Pédale de musique Zoom GFX-5