Zoom ADSL X6v Manuel d'utilisateur télécharger pdf (Page 155)

Appendix D: Troubleshooting

155

 Verify that the jack the phone cord is connected to is enabled

for DSL service. Check with your service provider.

 Your phone cord may be defective. Replace the phone cord

with a known good one.

 Check that you have phone filters on all the phones and fax

machines using the same ADSL line as the X6v

.These devices

can produce noise and interfere with your ADSL connection

when they are off-hook.

Problem

I cannot log into the Zoom Configuration Manager. I have

typed http://192.168.0.1, but I am not prompted for a User Name

and Password.

Solution

There are several issues that could cause this problem. Check these

items:

 If you are using a Macintosh or Linux computer, your TCP/IP

settings may not be properly configured. See page

146 for

more information.

 If you are using Mac OS X 10.3 and above, renew your IP

address: Point to System Preferences, then choose

Network. Click the Configure button and then the Renew

DHCP Lease button.

 If you are using a Windows computer, perform a

Release/Renew operation:

 Windows 2000/XP: From the desktop, click the Start button,

then point to Programs, point to Accessories, and then select

Command Prompt. Type ipconfig /all and press the Enter

key on your keyboard. In the subsequent dialog box, make sure

the NIC adapter is highlighted in the drop-down list, click

Renew, and then click Release. Then type 192.168.0.1 into

your browser’s address bar, and the Authentication box

should display.

 For Windows 95/98/Me: From the desktop, click the Start

button and the point to Run. Type winipcfg, and click OK. In

the subsequent dialog box, make sure the NIC adapter is

highlighted in the drop-down list, click Renew, and then click

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 165 166

Pas de commentaire

Zoom ADSL X6v Manuel d'utilisateur Page 155