Zoom ADSL X6v Manuel d'utilisateur télécharger pdf (Page 14)

6 Turn on the computer.

7 Plug one end of the supplied phone cord into the modem’s

DSL port and the other into the ADSL wall jack. The flashing

DSL light should become steady on. If it does not, refer to

Troubleshooting on page 153.

8 If you want to use the modem's VoIP capability, plug a phone

or cordless phone base station into the X6v's PHONE

connector.

To be able to switch between Internet and standard landline

phone service, plug one end of the supplied phone cord into

the X6v's TELCO (i.e., TELephone COmpany) connector and

the other end into the wall jack where you would normally plug

in a standard telephone.

We recommend that you put an ADSL filter on every

phone connected to the ADSL phone line. If you received a

filter or filter/splitter from Zoom, you can use that. You can

also purchase an ADSL filter from a retailer of telephone

accessories. ADSL filters and filter/splitters come in a variety

of styles and sizes and might not look identical to the

filter/splitters shown here.

Plug the LINE or PHONE LINE connector of the filter

into the wall jack that is enabled for DSL service.

Plug the X6v into the filter's MODEM connector.

Optionally, connect a phone cord between the filter's

PHONE connector and your X6v’s TELCO port.

Congratulations! You have installed the hardware. Now

continue with the next section, Establishing

Communication.

ADSL X6v User Guide

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 165 166

Pas de commentaire

Zoom ADSL X6v Manuel d'utilisateur Page 14