Zoom ADSL X6v Manuel d'utilisateur télécharger pdf (Page 98)

ADSL X6v User Guide

Setting Description

Port The Ethernet Ports 1-4 on the back of

your modem.

Configuration Shows how your Ethernet ports are set

up.

Linked A check mark indicates that the

Ethernet port is connected.

Speed/Duplex If you are having problems establishing

your Ethernet connection, try setting the

Speed/Duplex value to match that of

the Ethernet NIC in your computer.

Setting Up a Static Routing

Table

Do I need static routing?

Most users do not need to set up static routes. The default route

used in your modem will forward all packets correctly. However, if

you set up your network with different subnets, you can use static

routing to ensure your packets are handled correctly.

You can manually create a static route to tell the modem how to

reach a specific IP network. The route entry specifies a destination

network (or single host), together with a mask to indicate what

range of addresses the network covers, and a next-hop gateway

address or interface. If there is a choice of routes for a destination,

the route with the most specific mask is chosen.

To route to a destination that is not on any local network, a route

may be added via a gateway, for instance another router. The

gateway IP address must be on the same subnet as one of the

router's interfaces.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 165 166

Pas de commentaire

Zoom ADSL X6v Manuel d'utilisateur Page 98