Zoom PS-04 Spécifications Page 70

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 124
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 69
Reference [Rhythm]
70 ZOOM PS-04
Select drum kit/bass program
Selecting the drum kit or bass program to be used
by the pattern.
Refer to “Basic procedure for pattern editing” and
bring up “DRUM KIT” or “BASS PRG” on the
display. When you press the [ENTER] key, the
display changes as follows.
When “DRUM KIT” was selected
When “BASS PRG” was selected
By turning the dial in this condition, you can select
a new sound. For information on the various drum
kits and bass programs that are available, see the
list in the last section of this documentation.
Setting the pattern specific chord
type/root
You can select the chord type and root to be used by
the bass track of the pattern. When creating a song,
the chord and root specified here will be used as the
basis for the bass track phrase, which changes
according to the chord progression specified for the
song.
Refer to “Basic procedure for pattern editing” and
bring up “ORG ROOT” (for setting the chord root)
or “ORG CHORD” (for setting the chord type) on
the display. When you press the [ENTER] key, the
display changes as follows.
When “ORG ROOT” was selected
When “ORG CHORD” was selected
The root can be set from E to D# in semitone steps.
For the chord type, MAJOR or MINOR can be
selected. Make a suitable setting to match the bass
phrase recorded on the bass track.
H
INT
For patterns used only in PATTERN mode and
for patterns that do not use the bass track, the
chord type/root setting is not necessary.
Setting the drum/bass volume
You can set the volume level for the drum kit and
bass program. Refer to “Basic procedure for pattern
editing” and bring up “DRUM LVL” (for setting
the drum kit level) or “BASS LVL” (for setting the
bass track level) on the display. When you press the
[ENTER] key, the display changes as follows.
Turn the dial to set the volume in the range from 1
to 15. (The default setting is 15.)
Changing the pattern name
You can assign a unique name to a pattern. Refer to
“Basic procedure for pattern editing” and bring up
“NAME” on the display. When you press the
[ENTER] key, the display changes as follows.
Use the cursor left/right keys to cause the character
that you want to change to flash. Then turn the dial
to select the character. (The name can be up to five
Kit name Kit number
LIVE
LIVE
0
Program name Program number
PICK
PICK
1
F
F
Current root ("o" stands for #)
Current chord type
MAJORMAJOR
1O1O
Current volume setting
8BEAT
8BEAT
Character that can be adjusted
Vue de la page 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 123 124

Commentaires sur ces manuels

Pas de commentaire