Zoom PS-04 Spécifications Page 67

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 124
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 66
PATTERN mode operation
ZOOM PS-04 67
1/8 . . . . . Thirty-second note
1/12 . . . . Thirty-second triplet note
1/16 . . . . Sixty-fourth note
1/24 . . . . Sixty-fourth triplet note
5.
Use fader 4 to select the bank which
contains the desired pitch, and then
press the respective status key.
H
INT
The velocity setting can be changed with fader
3. This will change the play intensity.
6.
Press the [R/P] key.
The step position advances by a 16th note (12
ticks). To enter a rest, skip steps 4 and 5 and simply
press the [R/P] key. This will enter a 16th rest.
7.
Repeatedly press the [R/P] key to
advance to the position where you
want to enter the next note. Then
repeat steps 4 – 6.
If the duration or bank is the same as for the
previously entered note, you do not need to specify
it again.
When you have reached the end of the pattern, the
recorder automatically returns to the first measure.
8.
To erase a sound you have input,
press the [
R/P] key repeatedly to go
to that position. Hold down the
[INSERT/DELETE (COPY)] key and
press the respective status key.
The sound corresponding to the status key is erased.
9.
To end step input, press the [REC] key.
The key goes out and the PATTERN mode top
screen returns. If you press the [R/P] key in this
condition, the pattern is played and you can check
your input.
H
INT
By performing the input procedure again, you
can add playing information to the track.
Drum/bass track real-time input
You can also enter drum kit and bass program
information with the status keys in real time, while
the pattern is running.
1.
Bring up the PATTERN mode rhythm
pad screen.
2.
Use the cursor left/right keys to
select the track for which you want to
perform input.
The left corner of the display shows “DR” when the
drum track is selected, and “BS” when the bass
track is selected.
3.
Select the bank which contains the
desired pitch/sound and press the
status keys to check the sound.
If required, set the key and scale for the bass
program.
For information on how to switch banks and set the
key and scale for the bass program, see the section
“Playing drum/bass sounds manually” ( p. 62).
4.
Hold down the [REC] key and press
the [
R/P] key.
A precount of 4 clicks is heard. Recording begins
when the precount is finished.
H
INT
Precount settings can be changed ( p. 72).
5.
Use the status keys to play the drum
kit/bass program.
Your play timing is automatically matched to the
smallest note unit (default: sixteenth note) and
recorded on the selected track. For the bass track,
the duration for which the status key is pressed is
also recorded. When the pattern reaches the end, it
returns to the beginning and you can continue to
record.
Track type
Measure
Beat Tick
DO1-O1
DO1-O1
-00
Vue de la page 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 123 124

Commentaires sur ces manuels

Pas de commentaire