Zoom PS-04 Spécifications Page 50

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 124
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 49
Reference [Track Editing]
50 ZOOM PS-04
the end point for the range to be preserved after
trimming.
4.
Specify the trimming end point using
the same procedure as in step 2.
All data after the point specified here will be
erased.
5.
Press the [ENTER] key.
The indication “ENT/EXIT” appears on the display.
6.
To carry out the trimming operation,
press the [ENTER] key once more.
When the trimming process is finished, the track
edit menu appears again.
By pressing the [EXIT] key instead of the [ENTER]
key, you can cancel the operation and return to the
previous screen.
Editing using V-takes
Recorded audio data can also be edited in V-take
units. You can for example exchange the data on
two V-takes, or delete a V-take that is no longer
needed.
Basic steps for V-take editing
When editing audio data in V-take units, some steps
are similar for each action. These are as follows.
1.
From the AUDIO mode top screen,
press the [TRACK PARAMETER] key.
The parameters for tracks 1 – 4 are shown.
H
INT
The parameters for tracks 1 – 4 can also be
controlled in EFFECT mode.
2.
Use the cursor left/right keys to
select the track which includes the
V-take that you want to edit.
The name of the selected track is briefly shown on
the display, and then the track parameters and
settings values are shown.
3.
Use the cursor up/down keys to
bring up the indication “TR x-y” on
the display (where x is the track
number and y the V-take number).
4.
Turn the dial to select the V-take for
editing.
You can also use the cursor left/right keys to switch
tracks while you are selecting a V-take.
H
INT
It is also possible to select a V-take other than
the one currently selected for the track.
• When you select an unrecorded V-take, the
indication “E” (for “Empty”) is shown to the
right of the V-take number.
5.
Press the [INSERT/DELETE (COPY)]
key.
From this screen, you can select commands for
editing in V-take units by pressing the [INSERT/
DELETE(COPY)] key repeatedly. The following
commands are available. You can also use the
cursor left/right keys to select a command.
DELETE
Erase the audio data on a specified V-take.
COPY
Copy the audio data of a specified V-take to another
V-take.
OOOOOO
OOOOOO
000
TR
TR
ACK2
ACK2
EQ
EQ
HI
HI
0FF
TRTR 2-2-
1
Vue de la page 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 123 124

Commentaires sur ces manuels

Pas de commentaire