Zoom Gateway/Router V3 Manuel d'utilisateur télécharger pdf (Page 36)

Router configuration Guide Rev.1b

Digimerge Technologies Inc.

300Alden Road • Markham • Ontario • Canada • L3R4C1

tel: (905)946-8477 • fax: (905)947-0138

Appendix A

HOW TO ACCESS THE ROUTER CONFIGURATION SCREEN .

The Router configuration is the most important step in the process to view the cameras on the Internet. Most of the

routers are similar on the access, graphics interface and configuration. The first step to access the router

configuration screen it is to know the router IP address or “Gateway”. Usually the Web Browser is commonly used

to access the router configuration.

If you don’t know what is your router IP address ( gateway) do the following procedure

• Press on Start

• Click on RUN

• Type cmd and click OK

DOS command prompt window

In the DOS window type ipconfig and press ENTER

The information from your DOS prompt will show you the information related to your network.

This information will be:

a- Your computer IP address.

b- Your Subnet mask

c- Your Default gateway.

This information includes the Default Gateway IP address. This is the information we need to access the router

menus. Write down this information for later use.

Once you have the router IP address (gateway), open the Internet Explorer and type in the address bar

http://192.168.1.1

and press ENTER

You will see the LOGIN screen. Enter the user name and password to access the Router menus and

configuration

. ( if needed) .

1 2 ... 31 32 33 34 35 36 37 38 39

Pas de commentaire

Zoom Gateway/Router V3 Manuel d'utilisateur Page 36