Zoom Wireless-N Router Manuel d'utilisateur télécharger pdf (Page 22)



Using WPS as an alternative way to set up your Wireless

Network

If all the Wi-Fi compatible wireless devices on your network support WPS, you can

choose to quickly setup your wireless network by pushing a button on your cable

modem/router and on each wireless device connecting to your cable modem/router.

Windows 8 and Windows 7 users should follow the instructions below: Other

computers or devices such as tablets should go to If you are using a non Windows

computer or other device that supports WPS.

If you are using a Windows 8 or 7, computer:

1 Open Connect to a Network on that computer by right-clicking the network icon in

the notification area of the Windows taskbar.

2 A list of available networks is displayed.

3 Typically you then click Zoomxxxx where xxxx is 4 random alpha-numeric

characters. Zoomxxxx is the SSID printed on the bottom label of your Cable

Modem/Router. In the unlikely event that you changed the SSID from the default,

select your new SSID.

4 You will see a screen with a text box for the Security key. If WPS configuration is

supported, you may see a message such as You can also connect by pushing the

button on the router. If you see this message, continue at step 5 below.

5 Press the Wi‑Fi Protected Setup (WPS) button on the router for at least 7 seconds.

(You do not need to type a security key or passphrase in the Security key text box on

your Windows machine). The Cable Modem/Router will automatically set up the

computer to connect to the network and apply the network's security settings. Then

click OK on the computer’s Connect to a Network dialog box.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 114 115

Pas de commentaire

Zoom Wireless-N Router Manuel d'utilisateur Page 22