Zoom 707II Guitar Spécifications Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
11
ZOOM 707II GUITAR
1.
To set the 707II to the bypass (mute)
condition, press and release both
[
W
]/[
Q
] foot switches in play mode.
When you press and immediately release both
foot switches, the 707II goes into bypass mode.
While the 707II is in the bypass condition, all
effects are off and only the direct sound is
output. The expression pedal works as a volume
pedal.
When you press and hold both foot switches for
at least 1 second and then release them, the
707II goes into mute mode.
While the 707II is in the mute condition, there is
no sound output from the [OUTPUT/PHONES]
jack.
2.
Play the open string you want to tune.
The [BANK/PATCH] indicator shows the note
which is closest to the current pitch. Tune your
instrument until the note indication shows the
desired note.
3.
To change the reference pitch of the
tuner, use the TYPE [
W
]/[
Q
] keys.
The current reference pitch is briefly shown on
the display. The default setting after power-on is
center A = 440 Hz.
4.
While the reference pitch is shown,
you can change the pitch by pressing
the TYPE [
W
]/[
Q
] keys.
The available setting range is 435 – 445 Hz in
1-Hz steps. When the 707II is turned off and on
again, it will be reset to 440 Hz.
5.
Press one of the [W]/[Q] foot switches.
The 707II returns to the play mode.
440HZ
Reference pitch value
A8
A
A
B
C
C
D
D
G
G
E
F
F
The more the pitch is off,
the faster the indicator rotates
The note is shown on the left part of
the indicator
Pitch is sharp Correct pitch Pitch is flat
To the right of the note, a symbol indicates
by how much the tunin
g
is off.
**
MUTE
Press and release
after at least 1 second
**
BYPASS
Release immediately
Listening to Patches (Play Mode Operation)
Using the Tuner Function
The 707II incorporates an auto-chromatic tuner for guitar. To use the tuner function, the built-
in effects must be bypassed (temporarily turned off) or muted (direct sound and effect sound
turned off).
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Commentaires sur ces manuels

Pas de commentaire